1. You must have the latest free "ezManagerMax" software that came with your Animas Pump System.
2. Download your desired tune from our group on tudiabetes.org
2a. Use Winzip or Winrar to decompress your Animas tune. The compressed tune will have either a *.rar, or *.zip extension.
2b. After you've decompressed your tune (to whatever location you want), make sure that the file you've just extracted/decompressed has an *.ezt extension. If it does not, it is not a valid Animas tune file.
2c. Once the ezmanagermax software has loaded, choose "Configure Pump Tunes". The section should turn blue when you select it.
3. Look further down and choose your pump model. Always keep the communication port @ *SCAN ALL PORTS*. Now click start.
4.Choose category you want your new tune to play for, "Alarms", "Reminders", or "Warnings".
5.Choose open, then select your tune, or explorer your computer until you've found your downloaded tune. NOTE: ALL ANIMAS PUMP TUNES THAT ARE SHARED, WILL HAVE AN *.EZT EXTENSION. DO NOT DOWNLOAD ANY OTHER EXTENTION. EX. THEME_FROM_MASH.EZT. Any other file extension should be considered UNsafe. Once you have selected your desired tune, click open.
6. REMOVE YOUR PUMP FROM YOUR BODY.
6b. TEMPORARILY PUT YOUR PUMP ON SUSPENSION.
6c. MAKE SURE YOUR USB INFRURED CABLE IS CONNECTED TO YOUR COMPUTER.
6d. FOLLOW ANIMAS INSTRUCTIONS ON HOW TO POSITION YOUR PUMP WITH THE CABLE.
6e. Now click upload. it will remind you that it will remove/change your existing tune on your pump. Click ok, then it will start to sync.